2241245.jpg
Cover preview — IEEE 802.3 Standard for Ethernet — Page 2Cover preview — IEEE 802.3 Standard for Ethernet — Page 3Cover preview — IEEE 802.3 Standard for Ethernet — Page 4Cover preview — IEEE 802.3 Standard for Ethernet — Page 5Cover preview — IEEE 802.3 Standard for Ethernet — Page 6
Publication

IEEE 802.3 Standard for Ethernet

IEEE 802.3 Standard for Ethernet by IEEE (2022) — available for instant access at Publications Office.

IEEE 802.3 IEEE 2022
PDF download
$243.99
Searchable PDF · printing enabled · download after successful payment
Buy PDF — $243.99

About this publication

Scope This standard defines Ethernet local area, access and metropolitan area networks. Ethernet is specified at selected speeds of operation; and uses a common media access control (MAC) specification and management information base (MIB). The Carrier Sense Multiple Access with Collision Detection (CSMA/CD) MAC protocol specifies shared medium (half duplex) operation, as well as full duplex operation. Speed specific Media Independent Interfaces (MIIs) provide an architectural and optional implementation interface to selected Physical Layer entities (PHY). The Physical Layer encodes frames for transmission and decodes received frames with the modulation specified for the speed of operation, transmission medium and supported link length. Other specified capabilities include: control and management protocols, and the provision of power over selected twisted pair PHY types. Abstract Revision Standard - Active. Ethernet local area network operation is specified for selected speeds of operation from 1 Mb/s to 400 Gb/s using a common media access control (MAC) specification and management information base (MIB). The Carrier Sense Multiple Access with Collision Detection (CSMA/CD) MAC protocol specifies shared medium (half duplex) operation, as well as full duplex operation. Speed specific Media Independent Interfaces (MIIs) allow use of selected Physical Layer devices (PHYs) for operation over coaxial, twisted pair or fiber optic cables, or electrical backplanes. System considerations for multi-segment shared access networks describe the use of Repeaters that are defined for operational speeds up to 1000 Mb/s. Local Area Network (LAN) operation is supported at all speeds. Other specified capabilities include: various PHY types for access networks, PHYs suitable for metropolitan area network applications, and the provision of power over selected twisted pair PHY types. NOTE: Additional downloads are available at: https://standards.ieee.org/wp-content/uploads/2024/02/802.3-2022_errata.pdf and https://standards.ieee.org/wp-content/uploads/2022/07/802.3-2022_downloads.zip. A corrigendum is also available at https://ieeexplore.ieee.org/document/10841976