Publication

NBBI NB 23 (NBIC) National Board Inspection Code - Part 1 Installation

NBBI NB 23 (NBIC) National Board Inspection Code - Part 1 Installation by The National Board of Boiler and Pressure Vessel Inspectors (25th) — available for...

The National Board of Boiler and Pressure Vessel Inspectors 25th

PDF download

$51.99

Searchable PDF · printing enabled · download after successful payment

Buy PDF — $51.99

About this publication

NBBI NB 23 (NBIC) Part 1 – Installation is the volume of the National Board Inspection Code that provides rules and guidance for the proper installation of pressure‑retaining items and their pressure relief devices after construction. It is intended to ensure that boilers, pressure vessels, and associated piping are installed in a way that supports safe operation, inspection, and maintenance throughout their service life. Purpose and Scope NBIC Part 1 focuses on post‑construction installation requirements rather than original design and fabrication. It bridges the gap between construction codes (such as ASME Boiler and Pressure Vessel Code) and in‑service operation by specifying how equipment should be sited, supported, connected, and protected once it leaves the manufacturer. The scope typically covers boilers, pressure vessels, pressure piping, and related appurtenances, as well as the installation of pressure relief devices that protect these items. Main Topics Covered NB 23 (NBIC) Part 1 generally includes: General installation requirements Addresses responsibilities of installers and owners, jurisdictional requirements, documentation, and coordination with inspection agencies. Location and setting of equipment Provides guidance on clearances, access for inspection and maintenance, ventilation, combustion air, drainage, and environmental conditions suitable for safe operation. Supports, foundations, and anchorage Details requirements for foundations, saddles, hangers, and other supports to ensure that weight, thermal expansion, and operating loads are safely transmitted and controlled. Piping, connections, and auxiliaries Covers installation of feedwater, blowdown, fuel, and other piping, including valves, fittings, and expansion provisions, so that connected systems function reliably and safely. Pressure relief device installation Specifies how safety valves and other pressure relief devices must be mounted, oriented, drained, and piped so they can relieve pressure as intended and remain accessible for inspection and testing. Testing, commissioning, and initial inspection Outlines hydrostatic or other tests, checks of safety devices, and initial inspections that should be completed before the equipment is placed in regular service. Typical Users and Applications NBIC Part 1 is used by installers, contractors, and engineering firms responsible for placing boilers and pressure vessels into service, as well as by authorized inspectors and jurisdictional authorities who must verify code‑compliant installation. Owner‑users and plant engineers also rely on Part 1 when planning new installations, relocations, or major modifications to ensure ongoing safety, reliability, and regulatory compliance. Role in the NBIC Set Within the NB 23 NBIC 4‑volume set, Part 1 works alongside: Part 2 (Inspection) for in‑service inspection practices. Part 3 (Repairs and Alterations) for work performed on existing equipment. Part 4 (Pressure Relief Devices) for detailed requirements on pressure relief equipment. Together, Part 1 establishes the foundational installation practices that support safe operation, effective inspection, and compliant repair over the life of pressure‑retaining items.